SiPass Entro Door Modules

 

DC01 Door controller for use without reader

DC01The DC01 is designed to monitor and control one door in a SiPass Entro system. When it is connected to a door it continuously reports the status of that door (open or closed) to the system‚ which increases the level of security in the building. The DC01 cannot be connected to a reader. However‚ it can be used to unlock the door and thereby grant access to the public‚ for example‚ during certain times of the day or week‚ based on timer settings in the SiPass Entro system.

Spec Sheet

Technical data
Interface To segment controller: RS485 system com bus
Operating voltage 8 to 40 VDC or 8 to 30 VAC
Power consumption Power save 12V DC: 0.24 W
Full on 12V DC: 0.72 W
Power save 24V DC: 0.48 W
Full on 24V DC: 1.44 W
Inputs Exit button request with delay. Door contact for indicating closed/open door. Tamper switch for internal control.
Outputs Voltage-free relay contact, max. 2 A, 30 V
Tamper switch Yes
Operating temperature -35 to +50 °C
Environment Indoor use only
Housing Plastic box
Colour White
Dimensions (W x H x D) 120 x 80 x 40 mm
Opening time 1-99 secs programmable
Weight 0.16 kg
Approval CE

 

DC12 Door controller for use with reader(s)

DC12The DC12 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used, a single DC12 can support two readers and thereby control both entries and exits to a restricted area (anti-passback).

The DC12 includes an integrated status display window to simplify installation and service. It is compatible both with SiPass readers and with most third-party readers that support Wiegand and Clock&Data standards.

Technical data
Interface To reader: BC-Link, Clock&Data (track 2) or Wiegand (26 bit, 32 bit, 8 bit burst)
To controller: RS485 system com bus
Operating voltage 8 to 40 VDC‚ 8 to 30 VAC
Power consumption Without reader
Power save 12V DC: 0.59 W
Full on 12V DC: 0.76 W
Power save 24V DC: 0.63 W
Full on 24V DC: 0.79 W
Inputs Exit button. Door contact for indicating closed/open door
Outputs Voltage-free relay contact, max. 2 A, 30 V.
Tamper switch Integrated
Operating temperature -35 to +50 °C
Environment Indoor use only
Housing Wall-mounted composite housing
Colour White
Dimensions (W x H x D) 250 x 128 x 54 mm
Weight 0.5 kg
Approval CE

 

DC22 Door controller with alarm control functions

DC22The DC22 is designed to monitor and control one door in a SiPass Entro or SiPass integrated system. When BC-Link is used, a single DC22 can support two readers and thereby control both entries and exits to a restricted area (anti-passback).

The DC22 includes an integrated status display window to simplify installation and service. It is compatible both with SiPass readers and with most third-party readers that support Wiegand and Clock&Data standards.

The major difference between the DC12 and the DC22 is that the DC22 has additional inputs/outputs that support advanced alarm control functions, e.g. alarm status feedback (ASF). These are essential when integration with an intrusion detection system is required. The DC22 also has two outputs for electric locks (day/night lock) as well as separate inputs for open/closed and unlocked/locked door.

Note: The intrusion and ASF functions of the DC22 are only available in SiPass Entro.

Spec Sheet

Technical data
Interface To reader: BC-Link, Clock&Data (track 2) or Wiegand (26 bit, 32 bit, 8 bit burst)
To controller: RS485 system com bus
Operating voltage 8 to 40 VDC‚ 8 to 30 VAC
Power consumption Without reader
Power save 12V DC: 0.65 W
Full on 12V DC: 1.38 W
Power save 24V DC: 0.68 W
Full on 24V DC: 1.41 W
Inputs Exit button. Door contact for indicating closed/open door. Lock status sensor for indicating locked/unlocked door. Alarm bypass activating from a button or a timer. Alarm Status Feedback (ASF). Indication of alarm status (red LED).
Outputs Voltage-free change over contact
(lock relay)‚ max. 2 A‚ 30V.
Voltage-free closing contact
(motorlock relay)‚ max. 2 A‚ 30V.
Voltage-free change over contact
(alarm bypass relay)‚ max. 2 A‚ 30V.
Voltage-free closing contact (door
held warning relay
Tamper switch Integrated
Operating temperature -35 to +50 °C
Environment Indoor use only
Housing Wall-mounted composite housing
Colour White
Dimensions (W x H x D) 248 x 182 x 55 mm
Weight 0.7 kg
Approval CE

 

RF9 Wireless router

RF9RF9 extends the radio link between the SR35i and the RF30-EM. It also acts as a tool for measuring radio coverage. It includes three LEDs to indicate signal strength and communication quality.

Spec Sheet

 Technical data
Battery For test purposes
9 V. Type: 6LR61
Operating voltage 8 to 30 VAC
8 to 40 VDC
Current consumption Average: 40 mA
Peak: 110 mA (8 VDC)
Frequency band 2.4 GHz
Indicators 3 x LED (red/yellow/green)
Operating temperature -10 to +55 °C
Environment Indoor use only
Housing protection IP30
Colour Off-white, RAL9002
Dimensions (Ø x H) 110 x 48 mm (with socket)
Weight 0.10 kg
Approval CE