AC5102 Advanced central controller
The AC5102 advanced central controller can be programmed with up to 500‚000 cardholders and up to 96 doors. It has been specially designed for maximum flexibility‚ and provides six separate field level network (FLN) channels. Each FLN is capable of hosting up to 16 local devices for access control‚ monitoring input devices or controlling output devices.
The AC5102 also has a diagnostic port that provides a direct connection to its micro-processor to facilitate the download of operating instructions (firmware). Firmware updates can be made without having to visit the controller cabinets. Communication to the host system occurs via a 10/100Mb Ethernet connection. This allows communications over any WAN or LAN where devices on the network can be assigned a unique IP address. This type of communication ensures the fastest possible transaction times between the host system and AC5102 field panels.
The AC5102 hosts a tamper input that can be used to detect if the cabinet in which it has been mounted has been opened. It also provides an alarm output that can operate a visual or audio alarm when security has been breached.
Technical Data
Technical data
| Additional components | ACK5110 cable for modem connection |
| Interface | 6 x Field level network (FLN): – FLN 1: RS232 (modem port) or RS422 / RS485 – FLN 2 & 3: RS232 / RS422 / RS485 – FLN 4‚5‚6: RS485 only 1 x RS232 (RxD‚ TxD‚ GND‚ RJ12) 2 x LAN: RJ45 (10/100 MB Ethernet) 1 x USB 1 x USB-PC |
| Operating voltage | 12/24 VDC (-10 / +15%) |
| Power consumption | Max. 10 W (fully loaded) |
| Alarm input | 1 x Tamper input‚ 1 x Power fail input |
| Alarm output | 1 x Alarm output (optical relay‚ max. 12 V‚ 100 mA) |
| Door capacity | 96 |
| Card capacity | 500‚000 |
| Indicators | Power‚ Active‚ Error‚ COM‚ USB‚ SDCard‚ 4 x Ethernet |
| LCD Display | None |
| Keypad | None |
| Tamper switch | Optional |
| Operating temperature | 0 to +50 °C |
| Environment | Indoor use only |
| Housing | Steel |
| Colour | Grey and blue |
| Dimensions (W x H x D) | 124 x 220 x 54 mm |
| Weight | 990 g |
| Approval | CE‚ UL294‚ C-Tick‚ FCC |
AC5200 ACC-Lite
The AC5200 is a smaller version of Siemens’ high-performance IP-based advanced central controller models (AC5100 and AC5102). It can manage up to 40‚000 cardholders.
The ACC-Lite has been specially designed to provide a low-cost alternative for smaller or branch installations. It provides one field level network (FLN) channel which is capable of hosting up to 8 doors for access control, monitoring input devices or controlling output devices.
Firmware can be easily downloaded or updated via TCP/IP connection without having to visit the controller cabinets. Communication with the host system occurs via a two-port Ethernet switch which provides 10/100Mb LAN connection. This makes it possible to “daisy chain” controllers. TCP/IP communication ensures the fastest possible transaction times between the host system and the field panels.
In case of power failure the database on the ACC-Lite is protected in battery-backed memory. This maintains the integrity of the access control data and ensures that the ACC-Lite is back online as soon as power is restored.
Technical Data
| Interface | Communication interfaces: RS232, RS485, TC/IP for LAN/WAN – RJ45: 2 x Points, 10/100 MB Ethernet (Switched) – RS485: FLN interface, two-wire, max. eight devices per FLN bus. – RS232 modem communications |
| Operating voltage | 8 to 40 VDC‚ 8 to 30 VAC |
| Current consumption | 100 mA @24V DC 200 mA @12V DC |
| Power consumption | 24 W |
| Door capacity | Eight |
| Card capacity | 40,000 |
| LCD Display | Alphanumeric |
| Keypad | 4 x 4 matrix |
| Tamper switch | Integrated |
| Operating temperature | 0 to +50 °C |
| Environment | Indoor use only |
| Housing | Plastic housing for wall mounting |
| Colour | White |
| Dimensions (W x H x D) | 248 x 182 x 66 mm |
| Weight | 0.70 kg |
| Approval | CE, C-Tick |
ACC-AP IP Based Door Controller
The IP-based ACC-AP Door Controller can be connected to existing structured cable networks, saving time and cost. It communicates via Internet/Intranet with the SiPass system and can be configured through the Components dialog in SiPass integrated Configuration Client. Up to 750 controllers are supported. This number will be expanded in future market packages.
The controller is capable of controlling up to two doors (four readers), supporting FLN devices and hosting units such as the 8IO, OPM and IPM, while enabling standard features like distributed intelligence and IP addressing of doors.
The “OSDP V2 Encryption for Readers” is the latest standard in reader communication, while the “AES 128 Bit Encryption between Server and Controller” offers a high-level security at all times.
Technical Data
| Interface | To server: TC/IP, AES 128 Bit Encryption To FLN devices: (8I0, IPM, OPM input/output modules)- RS485, two wire Readers: OSDP V1 or V2 encrypted |
| Operating voltage | 12 or 24 VDC |
| Offline event buffer | Up to 200,000 events |
| Door capacity | Two |
| Card capacity | 500,000 |
| Outputs | 2 Relay Outputs 4 Open-collector Outputs |
| Inputs | 4 Monitored or Unmonitored Inputs |
| Tamper switch | Integrated lid and pry-off tamper protection |
| Operating temperature | 0 to +50 °C |
| Environment | Indoor use only |
| Housing | Plastic housing for wall mounting |
| Color | White |
| Dimensions (W x H x D) | 210 x 156 x 53 mm (8.3 x 6.1 x 2.1 inches) |
| Max. number of controllers | 750 |