Menu Close

Siemens GM760 Seismic Sensor

Siemens GM760 seismic sensorThe GM760 from Vanderbilt International (previously Siemens) is a programmable intelligent seismic sensor for strong room walls and doors, safes, night deposits and ATM’s.

Ideally suited to high security applications: A remote sensitivity adjustment input allows the sensitivity to be adapted to ignore signals generated during ATM operation. Special logical filtering allows the sensors to distinguish between attacks and the signals generated by the operation of ATMs or night safes. UL listed.

The optional GMSW7 SensTool software provides event memory and allows modification of the default operating parameters and monitoring of detector performance. The most common programming settings can also be selected using dipswitches`on the sensor.

Operating range: 5m radius (80m²).

Suitable for steel, concrete or synthetic surfaces

Applications: vaults, safes, modular vaults, lightweight safes, ATMs, night deposit safes.

Technical data

Power supply  8 – 16 VDC (12 V nominal)

Current consumption (12 VDC)  3 mA (5 mA on alarm)

Coverage area for all attack methods  5 m / 80 m² on concrete

Alarm output relay  Opens on alarm, 30 VDC / 100 mA

Sensitivity settings  3 levels selectable by DIP switches +1 level programmable via SensTool PC software

Housing protection (EN 60529)  IP43

Operating temperature  -40 ~ +70 °C

Approvals  UL, CCC, CSA

Dimensions (W x H x D)  89 x 89 x 22 mm / 3.5 x 3.5 x 0.9 inches

Weight  0.210 kg / 0.46 lbs

Specification sheet      Datos técnicos en español